[NVIM] Fix osc52 typo

.gitignore

@@ -1,3 +1,5 @@
 *.swp
+.shared_config
 tags
 .DS_STORE
+__pycache__

clone_and_link.sh

@@ -1,4 +1,4 @@
-#! /bin/sh
+#! /bin/bash
 #
 # clone_and_link.sh
 # Copyright (C) 2016 fabian <fabian@fabi-laptop-arch>
@@ -7,8 +7,24 @@
 #
 
 
-ln -Tsv $PWD/zsh $HOME/.zsh
-ln -Tsv ~/.zsh/.zshrc $HOME/.zshrc
-ln -Tsv $PWD/tmux $HOME/.tmux
-ln -Tsv ~/.tmux/.tmux.conf $HOME/.tmux.conf
-ln -Tsv $PWD/nvim $HOME/.config/nvim
+if [[ $1 == "shared" ]]; then
+    ln -Tsfv $PWD/zsh $HOME/.zsh
+    ln -Tsfv ~/.zsh/.zshrc $HOME/.zshrc
+    touch ~/.zsh/.shared_config
+    ln -Tsfv $PWD/tmux $HOME/.tmux
+    ln -Tsfv ~/.tmux/.tmux.conf $HOME/.tmux.conf
+    mkdir -p $HOME/.config
+    rm -rf $HOME/.config/nvim
+    ln -Tsfv $PWD/nvim $HOME/.config/nvim
+    touch $HOME/.config/nvim/.shared_config
+else
+    ln -Tsfv $PWD/zsh $HOME/.zsh
+    ln -Tsfv ~/.zsh/.zshrc $HOME/.zshrc
+    ln -Tsfv $PWD/tmux $HOME/.tmux
+    ln -Tsfv ~/.tmux/.tmux.conf $HOME/.tmux.conf
+    mkdir -p $HOME/.config
+    rm -rf $HOME/.config/nvim
+    ln -Tsfv $PWD/nvim $HOME/.config/nvim
+fi
+
+cat $PWD/ssh_tty | sudo tee /etc/sudoers.d/ssh_tty > /dev/null

clone_and_link_mac.sh

@@ -1,17 +0,0 @@
-#! /bin/sh
-#
-# clone_and_link.sh
-# Copyright (C) 2016 fabian <fabian@fabi-laptop-arch>
-#
-# Distributed under terms of the MIT license.
-#
-
-
-gln -Tsv $PWD/zsh $HOME/.zsh
-gln -Tsv ~/.zsh/.zshrc $HOME/.zshrc
-gln -Tsv $PWD/tmux $HOME/.tmux
-gln -Tsv ~/.tmux/.tmux.conf $HOME/.tmux.conf
-mkdir -p $HOME/.config/nvim
-gln -Tsv $PWD/nvim $HOME/.config/nvim
-gln -Tsv $PWD/.config/alacritty $HOME/.config/alacritty
-gln -Tsv $PWD/zsh/.p10k.mac.zsh.example  $PWD/zsh/.p10k.mac.zsh

general_setup.sh

@@ -1,12 +0,0 @@
-#! /bin/sh
-#
-# general_setup.sh
-# Copyright (C) 2016 fabian <fabian@testvm>
-#
-# Distributed under terms of the MIT license.
-#
-
-echo "exit" | zsh
-chsh -s /usr/bin/zsh
-tmux
-echo ":PluginInstall" | vim

i3/.Xresources

@@ -1,104 +0,0 @@
-#if __has_include(".extend.Xresources")
-#include ".extend.Xresources"
-#endif
-
-! ^ The above lines are no comments!
-! Leave them as they are if a file ~/.extend.Xresources is being used on your system.
-! config can be added there or also here below.
-! For comments use "!"
-
-Xft.dpi: 96
-Xft.antialias: true
-Xft.hinting: true
-Xft.rgba: rgb
-Xft.autohint: false
-Xft.hintstyle: hintslight
-Xft.lcdfilter: lcddefault
-
-XTerm*background: #2b2b2b
-XTerm*foreground: #e7e7e7
-XTerm*pointerColor: #16A085
-XTerm*faceName: Input Mono:size=9:antialias=false
-XTerm*font: 7x13
-
-#define base00 #282936
-#define base01 #3a3c4e
-#define base02 #4d4f68
-#define base03 #626483
-#define base04 #62d6e8
-#define base05 #e9e9f4
-#define base06 #f1f2f8
-#define base07 #f7f7fb
-#define base08 #ea51b2
-#define base09 #b45bcf
-#define base0A #00f769
-#define base0B #ebff87
-#define base0C #a1efe4
-#define base0D #62d6e8
-#define base0E #b45bcf
-#define base0F #00f769
-
-! URxvt settings
-
-URxvt*font:              xft:Input\ Mono:pixelsize=11
-URxvt*boldFont:          xft:Input\ Mono:pixelsize=11
-URxvt*loginShell:        true
-URxvt*cursorUnderline:   false 
-URxvt*scrollBar:         false 
-URxvt*letterSpace:       1 
-URxvt*imLocale:          en_US.UTF-8
-!URxvt*scrollstyle:      plain 
-!URxvt*scrollBar_right:  true
-URxvt*termName:          rxvt
-URxvt.buffered:          true
-URxvt.perl-ext:          default,matcher
-URxvt.urlLauncher:       /bin/firefox
-URxvt.matcher.button:    1 
-URxvt.transparent:       False
-URxvt.shading:           5
-
-URxvt*foreground:   #1abc9c
-URxvt*background:   #1F2D3A
-URxvt*cursorColor:  #1abc9c
-
-URxvt*color0:       #2c3e50
-URxvt*color1:       #c0392b
-URxvt*color2:       #27ae60
-URxvt*color3:       #f39c12
-URxvt*color4:       #2980b9
-URxvt*color5:       #8e44ad
-URxvt*color6:       #16a085
-URxvt*color7:       #bdc3c7
-
-URxvt*color8:       #34495e
-URxvt*color9:       #e74c3c
-URxvt*color10:      #2ecc71
-URxvt*color11:      #f1c40f
-URxvt*color12:      #3498db
-URxvt*color13:      #9b59b6
-URxvt*color14:      #2AA198
-URxvt*color15:      #ecf0f1
-
-! Note: colors beyond 15 might not be loaded (e.g., xterm, urxvt),
-! use 'shell' template to set these if necessary
-URxvt*color16:      base09
-URxvt*color17:      base0F
-URxvt*color18:      base01
-URxvt*color19:      base02
-URxvt*color20:      base04
-URxvt*color21:      base06
-
-URxvt*keysym.Shift-Control-V: perl:clipboard:paste
- 
-URxvt*iso14755: False
- 
-URxvt*perl-ext-common: default,clipboard
-
-! ------------------------------------------------------------------------------
-! ROFI Color theme
-! ------------------------------------------------------------------------------
-rofi.color-enabled: true
-rofi.color-window: #273238, #273238, #1e2529
-rofi.color-normal: #273238, #c1c1c1, #273238, #394249, #ffffff
-rofi.color-active: #273238, #80cbc4, #273238, #394249, #80cbc4
-rofi.color-urgent: #273238, #ff1844, #273238, #394249, #ff1844

i3/.xinitrc

@@ -1,5 +0,0 @@
-xrandr --setprovideroffload 1 0
-setxkbmap de
-xrdb -merge ~/.Xresources
-eval $(/usr/bin/gnome-keyring-daemon --start --components=pkcs11,secrets,ssh)
-export SSH_AUTH_SOCK

i3/98-monitor-hotplug.rules

@@ -1 +0,0 @@
-KERNEL=="card0", SUBSYSTEM=="drm", ACTION=="change", ENV{DISPLAY}=":0", ENV{XAUTHORITY}="/home/fabian/.Xauthority", RUN+="/bin/bash /usr/local/bin/auto_monitor.sh"  

i3/auto_monitor.sh

@@ -1,62 +0,0 @@
-#! /bin/sh
-#
-# monitors.sh
-# Copyright (C) 2017 Fabian Ising <fabian@murgi.de>
-#
-# Distributed under terms of the Apache v2.0 license.
-#
-
-# Get out of town if something errors
-set -e
-
-HDMI_STATUS=$(</sys/class/drm/card0/card0-HDMI-A-1/status )  
-HDMI2_STATUS=$(</sys/class/drm/card0/card0-HDMI-A-2/status )  
-DP_STATUS=$(</sys/class/drm/card0/card0-DP-1/status )  
-I3CONFIG=/home/fabian/i3/i3config
-
-
-echo "Rule run" >> /tmp/udev_test
-OUT2="eDP-1"
-if [ "connected" == "$HDMI_STATUS" ]; then  
-    xrandr >> /tmp/udev_test
-    /usr/bin/xrandr --output eDP-1 --auto --left-of HDMI-1
-    /usr/bin/notify-send --urgency=low -t 5000 "Graphics Update" "HDMI-1 plugged in"
-    echo "HDMI connected" >> /tmp/udev_test
-    xrandr >> /tmp/udev_test
-    OUT2="HDMI-1"
-else  
-    /usr/bin/xrandr --output HDMI-1 --off
-    /usr/bin/notify-send --urgency=low -t 5000 "Graphics Update" "External monitor (HDMI-1) disconnected"    
-    echo "HDMI disconnected" >> /tmp/udev_test
-fi
-
-if [ "connected" == "$HDMI2_STATUS" ]; then  
-    xrandr >> /tmp/udev_test
-    /usr/bin/xrandr --output eDP-1 --auto --left-of HDMI-2
-    /usr/bin/notify-send --urgency=low -t 5000 "Graphics Update" "HDMI-2 plugged in"
-    echo "HDMI-2 connected" >> /tmp/udev_test
-    xrandr >> /tmp/udev_test
-    OUT2="HDMI-2"
-else  
-    /usr/bin/xrandr --output HDMI-2 --off
-    /usr/bin/notify-send --urgency=low -t 5000 "Graphics Update" "External monitor (HDMI-2) disconnected"    
-    echo "HDMI disconnected" >> /tmp/udev_test
-fi
-
-if [ "connected" == "$DP_STATUS" ]; then  
-    xrandr >> /tmp/udev_test
-    /usr/bin/xrandr --output eDP-1 --auto --right-of DP-1
-    /usr/bin/notify-send --urgency=low -t 5000 "Graphics Update" "DP-1 plugged in"
-    echo "DP connected" >> /tmp/udev_test
-    xrandr >> /tmp/udev_test
-    OUT2="DP-1"
-else  
-    /usr/bin/xrandr --output DP-1 --off
-    /usr/bin/notify-send --urgency=low -t 5000 "Graphics Update" "External monitor (DP-1) disconnected"    
-    echo "DP disconnected" >> /tmp/udev_test
-fi
-sed 's/^set\s\s*$OUTPUT_EVEN\s.*/set $OUTPUT_EVEN '$OUT2'/' -i "$I3CONFIG"
-i3-msg [workspace=2] move workspace to output $OUT2
-i3-msg [workspace=4] move workspace to output $OUT2
-i3-msg [workspace=6] move workspace to output $OUT2
-i3-msg reload

i3/i3config

@@ -1,232 +0,0 @@
-# This file has been auto-generated by i3-config-wizard(1).
-# It will not be overwritten, so edit it as you like.
-#
-# Should you change your keyboard layout some time, delete
-# this file and re-run i3-config-wizard(1).
-#
-
-# i3 config file (v4)
-#
-# Please see http://i3wm.org/docs/userguide.html for a complete reference!
-set $OUTPUT_ODD eDP-1
-set $OUTPUT_EVEN eDP-1
-
-set $mod Mod4
-
-# Font for window titles. Will also be used by the bar unless a different font
-# is used in the bar {} block below.
-font pango:monospace 8
-
-# This font is widely installed, provides lots of unicode glyphs, right-to-left
-# text rendering and scalability on retina/hidpi displays (thanks to pango).
-#font pango:DejaVu Sans Mono 8
-
-# Before i3 v4.8, we used to recommend this one as the default:
-# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
-# The font above is very space-efficient, that is, it looks good, sharp and
-# clear in small sizes. However, its unicode glyph coverage is limited, the old
-# X core fonts rendering does not support right-to-left and this being a bitmap
-# font, it doesn’t scale on retina/hidpi displays.
-
-# Use Mouse+$mod to drag floating windows to their wanted position
-floating_modifier $mod
-
-# start a terminal
-bindsym $mod+Return exec "termite -e tmux"
-
-# kill focused window
-bindsym $mod+Shift+q kill
-
-# start dmenu (a program launcher)
-#bindsym $mod+d exec i3-dmenu-desktop
-# There also is the (new) i3-dmenu-desktop which only displays applications
-# shipping a .desktop file. It is a wrapper around dmenu, so you need that
-# installed.
-# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
-
-# change focus
-bindsym $mod+h focus left
-bindsym $mod+j focus down
-bindsym $mod+k focus up
-bindsym $mod+l focus right
-
-# alternatively, you can use the cursor keys:
-bindsym $mod+Left focus left
-bindsym $mod+Down focus down
-bindsym $mod+Up focus up
-bindsym $mod+Right focus right
-
-# move focused window
-bindsym $mod+Shift+h move left
-bindsym $mod+Shift+j move down
-bindsym $mod+Shift+k move up
-bindsym $mod+Shift+l move right
-
-# alternatively, you can use the cursor keys:
-bindsym $mod+Shift+Left move left
-bindsym $mod+Shift+Down move down
-bindsym $mod+Shift+Up move up
-bindsym $mod+Shift+Right move right
-
-# split in horizontal orientation
-bindsym $mod+minus split h
-
-# split in vertical orientation
-bindsym $mod+bar split v
-
-# enter fullscreen mode for the focused container
-bindsym $mod+f fullscreen toggle
-
-# change container layout (stacked, tabbed, toggle split)
-bindsym $mod+s layout stacking
-bindsym $mod+w layout tabbed
-bindsym $mod+e layout toggle split
-
-# toggle tiling / floating
-bindsym $mod+Shift+space floating toggle
-
-# change focus between tiling / floating windows
-bindsym $mod+space focus mode_toggle
-
-# focus the parent container
-bindsym $mod+a focus parent
-
-# focus the child container
-#bindsym $mod+d focus child
-
-# switch to workspace
-bindsym $mod+1 workspace 1
-bindsym $mod+2 workspace 2
-bindsym $mod+3 workspace 3
-bindsym $mod+4 workspace 4
-bindsym $mod+5 workspace 5
-bindsym $mod+6 workspace 6
-bindsym $mod+7 workspace 7
-bindsym $mod+8 workspace 8
-bindsym $mod+9 workspace 9
-bindsym $mod+0 workspace 10
-
-# move focused container to workspace
-bindsym $mod+Shift+1 move container to workspace 1
-bindsym $mod+ctrl+1 move container to workspace 1
-bindsym $mod+Shift+2 move container to workspace 2
-bindsym $mod+ctrl+2 move container to workspace 2
-bindsym $mod+Shift+3 move container to workspace 3
-bindsym $mod+ctrl+3 move container to workspace 3
-bindsym $mod+Shift+4 move container to workspace 4
-bindsym $mod+ctrl+4 move container to workspace 4
-bindsym $mod+Shift+5 move container to workspace 5
-bindsym $mod+ctrl+5 move container to workspace 5
-bindsym $mod+Shift+6 move container to workspace 6
-bindsym $mod+ctrl+6 move container to workspace 6
-bindsym $mod+Shift+7 move container to workspace 7
-bindsym $mod+ctrl+7 move container to workspace 7
-bindsym $mod+Shift+8 move container to workspace 8
-bindsym $mod+ctrl+8 move container to workspace 8
-bindsym $mod+Shift+9 move container to workspace 9
-bindsym $mod+ctrl+9 move container to workspace 9
-bindsym $mod+Shift+0 move container to workspace 10
-bindsym $mod+ctrl+0 move container to workspace 10
-
-# reload the configuration file
-bindsym $mod+Shift+c exec "i3-msg reload && /usr/bin/notify-send -t 5000 --urgency=low 'Reload' 'Reloaded i3 config'"
-
-# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
-bindsym $mod+Shift+r restart
-# exit i3 (logs you out of your X session)
-bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
-
-# resize window (you can also use the mouse for that)
-mode "resize" {
-        # These bindings trigger as soon as you enter the resize mode
-
-        # Pressing left will shrink the window’s width.
-        # Pressing right will grow the window’s width.
-        # Pressing up will shrink the window’s height.
-        # Pressing down will grow the window’s height.
-        bindsym j resize shrink width 10 px or 10 ppt
-        bindsym k resize grow height 10 px or 10 ppt
-        bindsym l resize shrink height 10 px or 10 ppt
-        bindsym odiaeresis resize grow width 10 px or 10 ppt
-
-        # same bindings, but for the arrow keys
-        bindsym Left resize shrink width 10 px or 10 ppt
-        bindsym Down resize grow height 10 px or 10 ppt
-        bindsym Up resize shrink height 10 px or 10 ppt
-        bindsym Right resize grow width 10 px or 10 ppt
-
-        # back to normal: Enter or Escape
-        bindsym Return mode "default"
-        bindsym Escape mode "default"
-}
-
-bindsym $mod+r mode "resize"
-
-mode "moveit" {
-    bindsym Up move up 20px
-    bindsym Left move left 20px
-    bindsym Down move down 20px
-    bindsym Right move right 20px
-    bindsym $mod+m mode "default"
-    bindsym Escape mode "default"
-}
-bindsym $mod+m focus floating; mode "moveit"
-
-# Sound
-bindsym XF86AudioRaiseVolume exec --no-startup-id amixer set Master 5%+ unmute
-bindsym XF86AudioLowerVolume exec --no-startup-id amixer set Master 5%- unmute
-bindsym XF86AudioMute exec "amixer set Master 1+ toggle && amixer -c 0 set IEC958 1+ toggle"
-
-#Rofi
-bindsym $mod+d exec --no-startup-id "rofi -show drun"
-bindsym $mod+Shift+s exec --no-startup-id "rofi -show window"
-bindsym $mod+x exec --no-startup-id "rofi -combi-modi window,drun -show window -show drun"
-bindsym Mod1+Tab exec --no-startup-id "rofi -show window"
-bindsym Mod1+F2 exec --no-startup-id "rofi -show run"
-
-#Lock
-bindsym $mod+Escape exec --no-startup-id "i3lock -d -c 000000 -f"
-
-# Start i3bar to display a workspace bar (plus the system information i3status
-# finds out, if available)
-#bar {
-        #status_command i3status
-#}
-
-exec --no-startup-id nitrogen --restore
-exec --no-startup-id nm-applet
-exec --no-startup-id owncloud
-exec --no-startup-id "xset dpms 60"
-exec --no-startup-id "polybar top"
-exec --no-startup-id "polybar bottom"
-exec --no-startup-id "xfsettingsd"
-exec --no-startup-id "xfce4-power-manager"
-exec --no-startup-id "owncloud"
-#exec --no-startup-id "caffeine"
-
-#Colors
-# class                 border  backgr. text    indicator child_border
-client.placeholder      #242424 #242424 #242424
-client.background       #242424 #242424 #242424
-client.focused          #4A4A4A #4A4A4A #e5e5e5 #4A4A4A
-client.unfocused        #222222 #222222 #aaaaaa #222222
-client.focused_inactive #222222 #222222 #a9a9a9 #222222
-client.urgent           #4A4A4A #4A4A4A #f7f7f7 #4A4A4A
-
-hide_edge_borders both
-
-# Change monitor mirroring
-bindsym XF86Display exec --no-startup-id "/usr/local/bin/switch_monitors.sh"
-bindsym Shift+XF86Display exec --no-startup-id "/usr/local/bin/switch_monitors.sh mirror"
-
-# pdfpc
-assign [class="Pdfpc" window_role="presenter"] 1
-assign [class="Pdfpc" window_role="presentation"] 2
-
-# multi monitor
-workspace 1 output $OUTPUT_ODD
-workspace 2 output $OUTPUT_EVEN
-workspace 3 output $OUTPUT_ODD
-workspace 4 output $OUTPUT_EVEN
-workspace 5 output $OUTPUT_ODD
-workspace 6 output $OUTPUT_EVEN

i3/link_config.sh

@@ -1,25 +0,0 @@
-#! /bin/sh
-#
-# link_config.sh
-# Copyright (C) 2016 fabian <fabian@tmurgi.de>
-#
-# Distributed under terms of the MIT license.
-#
-mkdir -p $HOME/.config/i3
-mkdir -p $HOME/.config/polybar
-
-ln -Ts $PWD/i3config ~/.config/i3/config
-ln -Ts $PWD/polybarconfig ~/.config/polybar/config
-ln -Ts $PWD/.xinitrc ~/.xinitrc
-ln -Ts $PWD/.Xresources ~/.Xresources
-while true; do
-    read -p "Is this your laptop? [y/n]" yn
-    case $yn in
-        [Yy]* ) break;;
-        [Nn]* ) exit;;
-        * ) echo "Please answer yes or no.";;
-    esac
-done
-sudo ln -Ts $PWD/auto_monitor.sh /usr/local/bin/auto_monitor.sh
-sudo ln -Ts $PWD/switch_monitors.sh /usr/local/bin/switch_monitors.sh
-sudo ln -Ts $PWD/98-monitor-hotplug.rules /etc/udev/rules.d/98-monitor-hotplug.rules

i3/polybarconfig

@@ -1,474 +0,0 @@
-;=====================================================
-;
-;   To learn more about how to configure Polybar
-;   go to https://github.com/jaagr/polybar
-;
-;   The README contains alot of information
-;
-;=====================================================
-
-[colors]
-background = #222
-background-alt = #444
-foreground = #dfdfdf
-foreground-alt = #555
-primary = #ffb52a
-secondary = #e60053
-alert = #bd2c40
-
-[bar/top]
-monitor = eDP-1
-monitor-fallback = HDMI-1
-width = 100%
-height = 27
-;offset-x = 1%
-;offset-y = 1%
-radius = 6.0
-fixed-center = true
-
-background = ${colors.background}
-foreground = ${colors.foreground}
-
-line-size = 3
-line-color = #f00
-
-border-size = 4
-border-color = #00000000
-
-padding-left = 0
-padding-right = 2
-
-module-margin-left = 1
-module-margin-right = 2
-
-;font-0 = fixed:pixelsize=10;1
-;font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
-;font-2 = siji:pixelsize=10;1
-font-0 = fixed:pixelsize=10;1
-font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
-font-2 = MaterialIcons:antialias=false;pixelsize=10;1
-font-3 = PowerlineSymbols:size=10;1
-font-4 = FontAwesome:pixelsize=12
-
-
-modules-left = i3
-modules-center = date 
-modules-right = filesystem xkeyboard volume powermenu
-
-;tray-position = 
-;tray-padding = 2
-;tray-transparent = true
-;tray-background = #0063ff
-
-;wm-restack = bspwm
-;wm-restack = i3
-
-;override-redirect = true
-
-;scroll-up = bspwm-desknext
-;scroll-down = bspwm-deskprev
-
-;scroll-up = i3wm-wsnext
-;scroll-down = i3wm-wsprev
-;
-;[module/date]
-;type = internal/date
-
-;; Seconds to sleep between updates
-;interval = 1.0
-
-;; See "man date" for details on how to format the date string
-;; NOTE: if you want to use syntax tags here you need to use %%{...}
-;date = %Y-%m-%d%
-
-;; Optional time format
-;time = %H:%M
-
-;; if `date-alt` or `time-alt` is defined, clicking
-;; the module will toggle between formats
-;date-alt = %A%, %d %B %Y
-;time-alt = %H:%M:%S
-
-[bar/bottom]
-monitor = eDP-1
-monitor-fallback = HDMI-1
-width = 100%
-height = 27
-fixed-center = true
-bottom = true
-
-background = ${colors.background}
-foreground = ${colors.foreground}
-
-line-size = 3
-line-color = #f00
-
-border-size = 4
-border-color = #00000000
-
-padding-left = 2
-padding-right = 2
-
-module-margin-left = 1
-module-margin-right = 2
-
-font-0 = fixed:pixelsize=10;1
-font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
-font-2 = MaterialIcons:pixelsize=10;1
-font-3 = PowerlineSymbols:pixelsize=12
-font-4 = FontAwesome:pixelsize=12
-
-;modules-left = bspwm i3
-;modules-right = i3
-modules-center = memory cpu
-modules-right = temperature
-modules-left = battery backlight-acpi
-
-tray-position = right
-tray-padding = 2
-;tray-background = #0063ff
-
-;wm-restack = bspwm
-;wm-restack = i3
-
-scroll-up = i3wm-wsnext
-scroll-down = i3wm-wsprev
-
-[module/xwindow]
-type = internal/xwindow
-label = %title:0:30:...%
-
-[module/xkeyboard]
-type = internal/xkeyboard
-blacklist-0 = num lock
-
-format-prefix = "⌨ "
-format-prefix-foreground = ${colors.foreground}
-format-prefix-underline = ${colors.secondary}
-
-label-layout = %layout%
-label-layout-underline = ${colors.secondary}
-
-label-indicator-padding = 2
-label-indicator-margin = 1
-label-indicator-background = ${colors.secondary}
-label-indicator-underline = ${colors.secondary}
-
-[module/filesystem]
-type = internal/fs
-interval = 25
-
-mount-0 = /home
-
-label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
-label-unmounted = %mountpoint% not mounted
-label-unmounted-foreground = ${colors.foreground-alt}
-
-[module/bspwm]
-type = internal/bspwm
-
-label-focused = %index%
-label-focused-background = ${colors.background-alt}
-label-focused-underline= ${colors.primary}
-label-focused-padding = 2
-
-label-occupied = %index%
-label-occupied-padding = 2
-
-label-urgent = %index%!
-label-urgent-background = ${colors.alert}
-label-urgent-padding = 2
-
-label-empty = %index%
-label-empty-foreground = ${colors.foreground-alt}
-label-empty-padding = 2
-
-[module/i3]
-type = internal/i3
-format = <label-state> <label-mode>
-index-sort = true
-wrapping-scroll = false
-
-; Only show workspaces on the same output as the bar
-;pin-workspaces = true
-
-label-mode-padding = 2
-label-mode-foreground = #000
-label-mode-background = ${colors.primary}
-
-; focused = Active workspace on focused monitor
-label-focused = %index%
-label-focused-background = ${module/bspwm.label-focused-background}
-label-focused-underline = ${module/bspwm.label-focused-underline}
-label-focused-padding = ${module/bspwm.label-focused-padding}
-
-; unfocused = Inactive workspace on any monitor
-label-unfocused = %index%
-label-unfocused-padding = ${module/bspwm.label-occupied-padding}
-
-; visible = Active workspace on unfocused monitor
-label-visible = %index%
-label-visible-background = ${self.label-focused-background}
-label-visible-underline = ${self.label-focused-underline}
-label-visible-padding = ${self.label-focused-padding}
-
-; urgent = Workspace with urgency hint set
-label-urgent = %index%
-label-urgent-background = ${module/bspwm.label-urgent-background}
-label-urgent-padding = ${module/bspwm.label-urgent-padding}
-
-[module/mpd]
-type = internal/mpd
-format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
-
-icon-prev = 
-icon-stop = 
-icon-play = 
-icon-pause = 
-icon-next = 
-
-label-song-maxlen = 25
-label-song-ellipsis = true
-
-[module/xbacklight]
-type = internal/xbacklight
-
-format = <label> <bar>
-label = BL
-
-bar-width = 20
-bar-indicator = |
-bar-indicator-foreground = #ff
-bar-indicator-font = 2
-bar-fill = ─
-bar-fill-font = 2
-bar-fill-foreground = #9f78e1
-bar-empty = ─
-bar-empty-font = 2
-bar-empty-foreground = ${colors.foreground-alt}
-
-[module/backlight-acpi]
-inherit = module/xbacklight
-type = internal/backlight
-card = intel_backlight
-
-[module/cpu]
-type = internal/cpu
-interval = 2
-format-prefix = " "
-format-prefix-foreground = ${colors.foreground-alt}
-format-underline = #f90000
-label = %percentage%%
-
-;[module/memory]
-;type = internal/memory
-;interval = 2
-;format-prefix = " "
-;format-prefix-foreground = ${colors.foreground-alt}
-;format-underline = #4bffdc
-;label = %percentage_used%%
-[module/memory]
-type = internal/memory
-interval = 2
-; Available tags:
-;   <label> (default)
-;   <bar-used>
-;   <bar-free>
-format = <label> <bar-used>
-; Available tokens:
-;   %percentage_used% (default)
-;   %percentage_free%
-;   %gb_used%
-;   %gb_free%
-;   %gb_total%
-;   %mb_used%
-;   %mb_free%
-;   %mb_total%
-label = RAM %gb_used%/%gb_total%
-
-; Only applies if <bar-used> is used
-bar-used-indicator =
-bar-used-width = 15
-bar-used-foreground-0 = #55aa55
-bar-used-foreground-1 = #557755
-bar-used-foreground-2 = #f5a70a
-bar-used-foreground-3 = #ff5555
-bar-used-fill = ▐
-bar-used-empty = ▐
-bar-used-empty-foreground = #444444
-format-underline = #4bffdc
-
-[module/wlan]
-type = internal/network
-interface = 
-interval = 3.0
-
-format-connected = <ramp-signal> <label-connected>
-format-connected-underline = #9f78e1
-label-connected = %essid%
-
-format-disconnected =
-;format-disconnected = <label-disconnected>
-;format-disconnected-underline = ${self.format-connected-underline}
-;label-disconnected = %ifname% disconnected
-;label-disconnected-foreground = ${colors.foreground-alt}
-
-ramp-signal-0 = 
-ramp-signal-1 = 
-ramp-signal-2 = 
-ramp-signal-3 = 
-ramp-signal-4 = 
-ramp-signal-foreground = ${colors.foreground-alt}
-
-[module/eth]
-type = internal/network
-interface = 
-interval = 3.0
-
-format-connected-underline = #55aa55
-format-connected-prefix = " "
-format-connected-prefix-foreground = ${colors.foreground-alt}
-label-connected = %local_ip%
-
-format-disconnected =
-;format-disconnected = <label-disconnected>
-;format-disconnected-underline = ${self.format-connected-underline}
-;label-disconnected = %ifname% disconnected
-;label-disconnected-foreground = ${colors.foreground-alt}
-
-[module/date]
-type = internal/date
-interval = 5
-
-date = " %Y-%m-%d"
-date-alt = " %Y-%m-%d"
-
-time = %H:%M:%S
-time-alt = %H:%M:%S
-
-format-prefix = 
-format-prefix-foreground = ${colors.foreground-alt}
-format-underline = #0a6cf5
-
-label = %date% %time%
-
-[module/volume]
-type = internal/volume
-
-format-volume = <label-volume> <bar-volume>
-label-volume = VOL
-label-volume-foreground = ${root.foreground}
-
-format-muted-prefix = " "
-format-muted-foreground = ${colors.foreground}
-label-muted = " sound muted"
-
-bar-volume-width = 10
-bar-volume-foreground-0 = #55aa55
-bar-volume-foreground-1 = #55aa55
-bar-volume-foreground-2 = #55aa55
-bar-volume-foreground-3 = #55aa55
-bar-volume-foreground-4 = #55aa55
-bar-volume-foreground-5 = #f5a70a
-bar-volume-foreground-6 = #ff5555
-bar-volume-gradient = false
-bar-volume-indicator = |
-bar-volume-indicator-font = 2
-bar-volume-fill = ─
-bar-volume-fill-font = 2
-bar-volume-empty = ─
-bar-volume-empty-font = 2
-bar-volume-empty-foreground = ${colors.foreground-alt}
-
-[module/battery]
-type = internal/battery
-battery = BAT1
-adapter = ACAD
-full-at = 98
-
-format-charging = <animation-charging> <label-charging>
-format-charging-underline = #ffb52a
-
-format-discharging = <ramp-capacity> <label-discharging>
-format-discharging-underline = ${self.format-charging-underline}
-
-format-full-prefix =""
-format-full-prefix-foreground = ${colors.foreground-alt}
-format-full-underline = ${self.format-charging-underline}
-
-ramp-capacity-0 = 
-ramp-capacity-0-foreground = ${colors.alert}
-ramp-capacity-1 = 
-ramp-capacity-2 = 
-ramp-capacity-3 = 
-ramp-capacity-foreground = ${colors.foreground-alt}
-
-animation-charging-0 = 
-animation-charging-1 = 
-animation-charging-2 = 
-animation-charging-3 = 
-animation-charging-foreground = ${colors.foreground-alt}
-animation-charging-framerate = 750
-
-[module/temperature]
-type = internal/temperature
-thermal-zone = 0
-warn-temperature = 60
-
-format = <ramp> <label>
-format-underline = #f50a4d
-format-warn = <ramp> <label-warn>
-format-warn-underline = ${self.format-underline}
-
-label = %temperature%
-label-warn = %temperature%
-label-warn-foreground = ${colors.secondary}
-
-ramp-0 =  
-ramp-1 = 
-ramp-2 =  
-ramp-3 = 
-ramp-foreground = ${colors.foreground-alt}
-ramp-3-foreground = ${colors.alert}
-
-[module/powermenu]
-type = custom/menu
-
-format-spacing = 1
-
-label-open = 
-label-open-foreground = ${colors.secondary}
-label-close =  cancel
-label-close-foreground = ${colors.secondary}
-label-separator = |
-label-separator-foreground = ${colors.foreground-alt}
-
-menu-0-0 = reboot
-menu-0-0-exec = menu-open-1
-menu-0-1 = power off
-menu-0-1-exec = menu-open-2
-menu-0-2 =  Lock
-menu-0-2-exec = i3lock
-
-menu-1-0 = cancel
-menu-1-0-exec = menu-open-0
-menu-1-1 = reboot
-menu-1-1-exec = systemctl reboot
-
-menu-2-0 = power off
-menu-2-0-exec = systemctl poweroff
-menu-2-1 = cancel
-menu-2-1-exec = menu-open-0
-
-[settings]
-screenchange-reload = true
-;compositing-background = xor
-;compositing-background = screen
-;compositing-foreground = source
-;compositing-border = over
-
-[global/wm]
-margin-top = 5
-margin-bottom = 5
-
-; vim:ft=dosini

i3/switch_monitors.sh

@@ -1,115 +0,0 @@
-#! /bin/sh
-#
-# switch_monitors.sh
-# Copyright (C) 2017 Fabian Ising <fabian@murgi.de>
-#
-# Distributed under terms of the Apache v2.0 license.
-#
-
-# Get info on the monitors
-HDMI_STATUS=$(</sys/class/drm/card0/card0-HDMI-A-1/status )  
-
-HDMI_ENABLED=$(</sys/class/drm/card0/card0-HDMI-A-1/enabled)  
-
-DP_STATUS=$(</sys/class/drm/card0/card0-DP-1/status )  
-DP_ENABLED=$(</sys/class/drm/card0/card0-DP-1/enabled )  
-
-# Check to see if our state log exists
-if [ ! -f /tmp/monitor ]; then  
-    touch /tmp/monitor
-    STATE=5
-else  
-    STATE=$(</tmp/monitor)
-fi
-
-# The state log has the NEXT state to go to in it
-
-# If monitors are disconnected, stay in state 1
-if [ "disconnected" == "$HDMI_STATUS" -a "disconnected" == "$DP_STATUS" ]; then  
-    STATE=5
-fi
-if [ $1 == "mirror" ]; then
-    if [ $STATE == 4 ]; then
-        /usr/bin/notify-send -t 5000 --urgency=low "Graphics Update" "Mirror Stuff from $STATE to 5"
-        # eDP-1 is on, projectors are mirroring
-        if [ "connected" == "$HDMI_STATUS" ]; then
-            /usr/bin/xrandr --output eDP-1 --auto --output HDMI-1 --auto --same-as eDP-1
-            TYPE="HDMI"
-        elif [ "connected" == "$DP_STATUS" ]; then
-            /usr/bin/xrandr --output eDP-1 --auto --output HDMI-1 --off --output DP-1 --auto --same-as eDP-1
-            TYPE="DP-1"
-        fi
-        /usr/bin/notify-send -t 5000 --urgency=low "Graphics Update" "Switched to $TYPE mirroring"
-        STATE=5
-    else
-        /usr/bin/notify-send -t 5000 --urgency=low "Graphics Update" "Mirror Stuff from $STATE to 4"
-        # eDP-1 is on, projectors are extending
-        if [ "connected" == "$HDMI_STATUS" ]; then
-            /usr/bin/xrandr --output eDP-1 --auto --output HDMI-1 --auto --right-of eDP-1
-            TYPE="HDMI"
-        elif [ "connected" == "$DP_STATUS" ]; then
-            /usr/bin/xrandr --output eDP-1 --auto --output HDMI-1 --off --output DP-1 --auto --left-of eDP-1
-            TYPE="DP-1"
-        fi
-        /usr/bin/notify-send -t 5000 --urgency=low "Graphics Update" "Switched to $TYPE extending"
-        STATE=4
-    fi
-else
-TYPE="eDP-1"
-case $STATE in  
-    1)
-    # eDP-1 is on, projectors not connected
-    /usr/bin/xrandr --output eDP-1 --auto
-    STATE=2
-    /usr/bin/notify-send -t 5000 --urgency=low "Graphics Update" "Switched to $TYPE"
-    ;;
-    2)
-    # eDP-1 is on, projectors are connected but inactive
-    /usr/bin/xrandr --output eDP-1 --auto --output HDMI-1 --off
-    TYPE="eDP-1"
-    STATE=3 
-    /usr/bin/notify-send -t 5000 --urgency=low "Graphics Update" "Switched to $TYPE"
-    ;;
-    3)
-    # eDP-1 is off, projectors are on
-    if [ "connected" == "$HDMI_STATUS" ]; then
-        /usr/bin/xrandr --output eDP-1 --off --output HDMI-1 --auto
-        TYPE="HDMI"
-    elif [ "connected" == "$DP_STATUS" ]; then
-        /usr/bin/xrandr --output eDP-1 --off --output HDMI-1 --off --output DP-1 --auto
-        TYPE="DP-1"
-    fi
-    /usr/bin/notify-send -t 5000 --urgency=low "Graphics Update" "Switched to $TYPE"
-    STATE=4
-    ;;
-    4)
-    # eDP-1 is on, projectors are mirroring
-    if [ "connected" == "$HDMI_STATUS" ]; then
-        /usr/bin/xrandr --output eDP-1 --auto --output HDMI-1 --auto --same-as eDP-1
-        TYPE="HDMI"
-    elif [ "connected" == "$DP_STATUS" ]; then
-        /usr/bin/xrandr --output eDP-1 --auto --output HDMI-1 --off --output DP-1 --auto --same-as eDP-1
-        TYPE="DP-1"
-    fi
-    /usr/bin/notify-send -t 5000 --urgency=low "Graphics Update" "Switched to $TYPE mirroring"
-    STATE=5
-    ;;
-    5) 
-    # eDP-1 is on, projectors are extending
-    if [ "connected" == "$HDMI_STATUS" ]; then
-        /usr/bin/xrandr --output eDP-1 --auto --output HDMI-1 --auto --right-of eDP-1
-        TYPE="HDMI"
-    elif [ "connected" == "$DP_STATUS" ]; then
-        /usr/bin/xrandr --output eDP-1 --auto --output HDMI-1 --off --output DP-1 --auto --left-of eDP-1
-        TYPE="DP-1"
-    fi
-    /usr/bin/notify-send -t 5000 --urgency=low "Graphics Update" "Switched to $TYPE extending"
-    STATE=2
-    ;;
-    *)
-    # Unknown state, assume we're in 1
-    STATE=1 
-esac    
-fi
-
-echo $STATE > /tmp/monitor  

link_config.sh

@@ -11,3 +11,7 @@ for filename in .config/*; do
 done
 
 ln -Ts $PWD/nvim $HOME/.config/nvim
+
+mkdir -p $HOME/.ssh
+chmod 700 $HOME/.ssh
+cat $PWD/ssh_config >> $HOME/.ssh/config

nvim/init.vim

@@ -1,15 +1,27 @@
 set nocompatible
 filetype off
 
+if ((!filereadable(stdpath('config') . "/.shared_config")) || (exists('$SUDO_USER') && $SUDO_USER == 'fabian'))
+    let shared_config = 0
+else
+    let shared_config = 1
+    echo "Using shared config."
+endif
+
 " Plugins
 " Note: on most systems, this will make the plugins reside in \
 " ~/.local/share/nvim/plugged/
 let data_dir = has('nvim') ? stdpath('data') . '/site' : '~/.vim'
 if empty(glob(data_dir . '/autoload/plug.vim'))
   silent execute '!curl -fLo '.data_dir.'/autoload/plug.vim --create-dirs  https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim'
+  let &runtimepath = &runtimepath
   autocmd VimEnter * PlugInstall --sync | source $MYVIMRC
 endif
 call plug#begin()
+
+" Warn about plugin updates
+Plug 'semanser/vim-outdated-plugins'
+
 " Powerline replacement
 Plug 'vim-airline/vim-airline'
 Plug 'vim-airline/vim-airline-themes'
@@ -34,10 +46,6 @@ Plug 'ConradIrwin/vim-bracketed-paste'
 " Tmux navigation
 Plug 'christoomey/vim-tmux-navigator'
 
-" YouCompleteMe
-Plug 'Valloric/YouCompleteMe'
-Plug 'rdnetto/YCM-Generator'
-
 " Git
 Plug 'tpope/vim-fugitive'
 
@@ -54,9 +62,6 @@ Plug 'SirVer/ultisnips'
 Plug 'honza/vim-snippets'
 Plug 'ervandew/supertab'
 
-"Buftabeline
-"Plug 'ap/vim-buftabline'
-
 " Highlight matching xml tags
 Plug 'Valloric/MatchTagAlways'
 
@@ -122,6 +127,13 @@ call submode#map('grow/shrink', 'n', '', '>', '<C-w>>')
 set splitbelow
 set splitright
 
+" Delete without copying
+nnoremap <leader>d "_d
+xnoremap <leader>d "_d
+nnoremap <leader>x "_x
+xnoremap <leader>x "_x
+xnoremap <leader>p "_dP
+
 "disable submode timeouts:
 let g:submode_timeout = 0
 " don't consume submode-leaving key
@@ -191,6 +203,11 @@ nmap <Leader>t :call TextWrapToggle()<CR>
 "augroup END
 
 "Copying
+if ((!shared_config) && (exists('$LC_OSC52') && $LC_OSC52 == '1'))
+lua << EOF
+    vim.g.clipboard = 'osc52'
+EOF
+endif
 set clipboard=unnamedplus,unnamed " Copy/Paste
 
 " Airline
@@ -201,26 +218,11 @@ nmap <F8> :TagbarToggle<CR>
 imap <F8> <ESC>:TagbarToggle<CR>gi
 nmap <C-]> <C-w><C-]><C-w>T
 
-" YouCompleteMe
-let g:ycm_collect_identifiers_from_tags_files = 1 " Read from tag files
-let g:ycm_global_ycm_extra_conf = '~/.config/nvim/.ycm_extra_conf.py' " Standard conf
-let g:ycm_enable_diagnostic_signs = 0 " Do not show semantic error bar
-let g:ycm_server_python_interpreter = 'python3'
-let g:ycm_key_list_select_completion   = ['<C-j>', '<C-n>', '<Down>']
-let g:ycm_key_list_previous_completion = ['<C-k>', '<C-p>', '<Up>']
-
 "Tags
 let g:easytags_async = 1
 
 " make
 set switchbuf=split
-"autocmd QuickFixCmdPre make set cmdheight=2
-"autocmd QuickFixCmdPost make nested cwindow "Open the quickfix window
-"autocmd QuickFixCmdPost make nested lwindow "Change to the quickfix window
-"nmap <F9> :silent! make<CR>:redraw!<CR>
-"nmap <Leader>m :silent! make<CR>:redraw!<CR>
-"nmap <Leader>x :silent! make ex<CR>:redraw!<CR>
-"imap <F9> <ESC>:make<CR>:redraw!<CR>i
 
 " vim-templates config-file
 try
@@ -270,7 +272,9 @@ endtry
 let g:tex_flavor = "latex"
 autocmd FileType yaml setlocal ts=2 sts=2 sw=2 expandtab
 
-if has("macunix")
-    " Required for virtualenvs
-    let g:python3_host_prog="/usr/local/bin/python3"
+if filereadable(expand("~/python-envs/neovim/bin/python3"))
+    let g:python3_host_prog="~/python-envs/neovim/bin/python3"
+else
+    let g:python3_host_prog="/usr/bin/python3"
 endif 
+

push.sh

@@ -1,14 +0,0 @@
-#! /bin/sh
-#
-# update.sh
-# Copyright (C) 2017 Fabian Ising <fabian@murgi.de>
-#
-# Distributed under terms of the Apache v2.0 license.
-#
-
-git pull
-
-git subtree push --prefix=i3 i3 master
-git subtree push --prefix=tmux tmux master
-git subtree push --prefix=zsh zsh master
-git subtree push --prefix=vim vim master

scripts/yank

@@ -0,0 +1,64 @@
+#!/bin/sh
+#
+# Usage: yank [FILE...]
+#
+# Copies the contents of the given files (or stdin if no files are given) to
+# the terminal that runs this program.  If this program is run inside tmux(1),
+# then it also copies the given contents into tmux's current clipboard buffer.
+# If this program is run inside X11, then it also copies to the X11 clipboard.
+#
+# This is achieved by writing an OSC 52 escape sequence to the said terminal.
+# The maximum length of an OSC 52 escape sequence is 100_000 bytes, of which
+# 7 bytes are occupied by a "\033]52;c;" header, 1 byte by a "\a" footer, and
+# 99_992 bytes by the base64-encoded result of 74_994 bytes of copyable text.
+#
+# In other words, this program can only copy up to 74_994 bytes of its input.
+# However, in such cases, this program tries to bypass the input length limit
+# by copying directly to the X11 clipboard if a $DISPLAY server is available;
+# otherwise, it emits a warning (on stderr) about the number of bytes dropped.
+#
+# See http://en.wikipedia.org/wiki/Base64 for the 4*ceil(n/3) length formula.
+# See http://sourceforge.net/p/tmux/mailman/message/32221257 for copy limits.
+# See http://sourceforge.net/p/tmux/tmux-code/ci/a0295b4c2f6 for DCS in tmux.
+#
+# Written in 2014 by Suraj N. Kurapati and documented at http://goo.gl/NwYqfW
+
+buf=$( cat "$@" )
+
+
+# Create the OSC52 escape string.
+len=$( printf %s "$buf" | wc -c ) max=74994
+test $len -gt $max && echo "$0: input is $(( len - max )) bytes too long" >&2
+esc="\033]52;c;$( printf %s "$buf" | head -c $max | base64 | tr -d '\r\n' )\a"
+test -n "$TMUX" && esc="\033Ptmux;\033$esc\033\\"
+
+# Output the string to waiting terminals
+printf "$esc"
+
+# Attempt to push to the raw SSH_TTY if that exists.
+test -n "$SSH_TTY" && printf "$esc" > $SSH_TTY
+
+if [ -n "$TMUX" ]; then
+  #push the OSC52 esc string to the clients directly.
+#  tmux_clients=$(tmux list-clients -F "#{client_tty}")
+#  readarray -t tmux_clients <<<"$tmux_clients"
+#  for c in ${tmux_clients[@]}; do
+#    printf "$esc" > $c
+#  done
+#
+  # And add it directly to the TMUX copy buffer.
+  test -n "$TMUX" && tmux set-buffer "$buf"
+fi
+
+# copy to X11 if possible...
+test -n "$DISPLAY" && command -v xsel > /dev/null && command -v xclip > /dev/null \
+    && printf %s "$buf" | { xsel -ib || xclip -sel c ;} && exit
+
+# copy to pbcopy on MacOS
+command -v pbcopy > /dev/null && printf %s "$buf" | pbcopy
+
+# Copy to remote pbcopy daemon, if attached
+if $(nc -z localhost 5556); then
+  printf %s "$buf" | nc localhost 5556
+
+fi

setup_mac.sh

@@ -1,30 +0,0 @@
-#! /bin/sh
-#
-# setup_mac.sh
-# Copyright (C) 2022 fabian <fabian@FordPrefect.home>
-#
-# Distributed under terms of the MIT license.
-#
-
-brew install neovim tmux alacritty coreutils
-pip3 install neovim
-echo For alacritty to work seemlessly with tmux, we will have to add '/usr/local/bin'\
-    to the path. This will require your root password.
-sudo launchctl config user path /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin 
-cp $PWD/nvim/scheme.vim.template $PWD/nvim/scheme.vim
-cp $PWD/.config/alacritty/schemes.yml.template $PWD/.config/alacritty/schemes.yml
-./clone_and_link_mac.sh
-
-for filename in zsh/.*_mac.example; do
-    cp $filename ${filename:0:-12}
-done
-
-for filename in tmux/.*_mac.example; do
-    cp $filename ${filename:0:-12}
-done
-
-for filename in vim/.*_mac.example; do
-    cp $filename ${filename:0:-12}
-done
-
-echo "You should now start tmux (and zsh) and nvim for automatic plugin installation."

setup_ubuntu.sh

@@ -0,0 +1,29 @@
+#! /bin/bash
+#
+# clone_and_link.sh
+# Copyright (C) 2016 fabian <fabian@fabi-laptop-arch>
+#
+# Distributed under terms of the MIT license.
+#
+shopt -s nullglob
+
+sudo apt -y update
+sudo apt -y dist-upgrade
+sudo apt -y install curl zsh tmux virtualenvwrapper powerline fonts-powerline python3 python3-pip python3-pynvim
+sudo snap install --classic nvim
+./clone_and_link.sh; true
+if [ $SHELL != "/bin/zsh" ]; then
+    chsh -s /usr/bin/zsh;
+fi
+
+for filename in zsh/.*_debian.example; do
+    ln -Tsfv $PWD/$filename $PWD/${filename:0:-15}
+done
+
+for filename in tmux/.*_debian.example; do
+    ln -Tsfv $PWD/$filename $PWD/${filename:0:-15}
+done
+
+for filename in nvim/.*_debian.example; do
+    ln -Tsfv $PWD/$filename $PWD/${filename:0:-15}
+done

setup_ubuntu_shared.zsh

@@ -0,0 +1,27 @@
+#! /usr/bin/zsh
+#
+# clone_and_link.sh
+# Copyright (C) 2016 fabian <fabian@fabi-laptop-arch>
+#
+# Distributed under terms of the MIT license.
+#
+sudo apt -y update
+sudo apt -y dist-upgrade
+sudo apt -y install curl zsh tmux virtualenvwrapper powerline fonts-powerline python3 python3-pip python3-pynvim
+sudo snap install --classic nvim
+./clone_and_link.sh shared; true
+if [ $SHELL != "/bin/zsh" ]; then
+    chsh -s /usr/bin/zsh;
+fi
+
+for filename in zsh/.*_debian.example(N); do
+    ln -Tsfv $PWD/$filename $PWD/${filename:0:-15}
+done
+
+for filename in tmux/.*_debian.example(N); do
+    ln -Tsfv $PWD/$filename $PWD/${filename:0:-15}
+done
+
+for filename in nvim/.*_debian.example(N); do
+    ln -Tsfv $PWD/$filename $PWD/${filename:0:-15}
+done

ssh_config

@@ -0,0 +1,3 @@
+Host *
+    IdentityAgent $SSH_REAL_SOCK
+    AddKeysToAgent yes

ssh_tty

@@ -0,0 +1 @@
+Defaults env_keep += "SSH_TTY SSH_CONNECTION SSH_CLIENT"

tmux/.tmux.conf

@@ -1,14 +1,11 @@
-set-environment -g PATH "/usr/local/bin:/bin:/usr/bin"
+set-environment -g PATH "$HOME/dotfiles/scripts:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
 set -g default-terminal "xterm-256color"
 
 set -g history-limit 20000
 
 # Remap prefix
-unbind C-b
 set-option -g prefix C-a
-bind-key C-a send-prefix
-bind-key -n C-b send-keys C-b
-#bind-key -n C-b send-prefix
+set-option -g prefix2 C-b
 
 setw -g mode-keys vi
 set-option -g status-keys vi
@@ -62,6 +59,11 @@ set-window-option -g mode-keys vi
 set-option -s set-clipboard on
 set -g @yank_with_mouse off
 set -g @yank_action 'copy-pipe'
+bind-key -Tcopy-mode-vi 'C-right' send -X next-word
+bind-key -Tcopy-mode-vi 'C-left' send -X previous-word
+unbind-key -T copy-mode-vi MouseDragEnd1Pane
+# Allow copy across SSH
+set -g @override_copy_command 'yank > #{pane_tty}'
 
 if '[ `uname` == Darwin ]' \
     'source-file ~/.tmux/.mac_config'
@@ -75,10 +77,11 @@ set -sg escape-time 10
 
 # List of plugins
 set -g @plugin 'tmux-plugins/tpm'
-set -g @plugin 'tmux-plugins/tmux-open'
+# Does not work on servers without GUI
+#set -g @plugin 'tmux-plugins/tmux-open'
 set -g @plugin 'tmux-plugins/tmux-yank'
 set -g @plugin 'jimeh/tmux-themepack'
-set -g @themepack 'powerline/double/blue'
+set -g @themepack 'powerline/double/red'
 
 setenv -g TMUX_PLUGIN_MANAGER_PATH "$HOME/.tmux/plugins/"
 

tmux/mac_tmux_wrapper.sh

@@ -1,11 +0,0 @@
-#! /bin/sh
-#
-# test.sh
-# Copyright (C) 2018 fabian <fabian@FordPrefect.local>
-#
-# Distributed under terms of the MIT license.
-#
-
-
-export PATH=$PATH:/usr/local/bin
-tmux

zsh/.os_config.zsh.debian.example

@@ -0,0 +1 @@
+[[ -f /etc/zsh_command_not_found ]] && source /etc/zsh_command_not_found

zsh/.virtual_env_config.zsh_debian.example

@@ -1,17 +1,10 @@
 export WORKON_HOME=~/python-envs
+export VIRTUALENVWRAPPER_VIRTUALENV=/usr/bin/virtualenv
 mkdir -p $WORKON_HOME
 source /usr/share/virtualenvwrapper/virtualenvwrapper.sh
 
-function workon() {
-    if ! { [ "$TERM" = "screen" ] && [ -n "$TMUX" ]; } then
-        if ! { [ -z "$1" ] } then
-            tmux setenv VIRTUAL_ENV "$1"
-        fi
-        source /usr/share/virtualenvwrapper/virtualenvwrapper.sh
-        workon "$@"
-    fi
-}
-
 if [ -n "$VIRTUAL_ENV" ]; then
-  workon $VIRTUAL_ENV
+    if [[ -f "$VIRTUAL_ENV/bin/activate" ]]; then
+      source $VIRTUAL_ENV/bin/activate;
+    fi
 fi

zsh/.zsh_plugins.txt

@@ -1,5 +1,6 @@
 # Load OMZ plugins
 ohmyzsh/ohmyzsh
+ohmyzsh/ohmyzsh path:plugins/vi-mode
 ohmyzsh/ohmyzsh path:plugins/git
 ohmyzsh/ohmyzsh path:plugins/golang
 ohmyzsh/ohmyzsh path:plugins/ssh-agent
@@ -7,6 +8,9 @@ ohmyzsh/ohmyzsh path:plugins/pip
 ohmyzsh/ohmyzsh path:plugins/python
 ohmyzsh/ohmyzsh path:plugins/virtualenv
 ohmyzsh/ohmyzsh path:plugins/python
+ohmyzsh/ohmyzsh path:plugins/docker
+ohmyzsh/ohmyzsh path:plugins/docker-compose
+ohmyzsh/ohmyzsh path:plugins/command-not-found
 
 
 romkatv/powerlevel10k
@@ -15,7 +19,6 @@ zsh-users/zsh-autosuggestions
 zsh-users/zsh-completions
 zsh-users/zsh-history-substring-search
 urbainvaes/fzf-marks
-greymd/docker-zsh-completion
 zdharma-continuum/fast-syntax-highlighting kind:defer
 
 # Initialize completions

zsh/.zsh_plugins_shared.txt

@@ -0,0 +1,23 @@
+# Load OMZ plugins
+ohmyzsh/ohmyzsh
+ohmyzsh/ohmyzsh path:plugins/git
+ohmyzsh/ohmyzsh path:plugins/golang
+ohmyzsh/ohmyzsh path:plugins/ssh-agent
+ohmyzsh/ohmyzsh path:plugins/pip
+ohmyzsh/ohmyzsh path:plugins/python
+ohmyzsh/ohmyzsh path:plugins/virtualenv
+ohmyzsh/ohmyzsh path:plugins/python
+ohmyzsh/ohmyzsh path:plugins/docker
+ohmyzsh/ohmyzsh path:plugins/docker-compose
+ohmyzsh/ohmyzsh path:plugins/command-not-found
+
+
+romkatv/powerlevel10k
+zsh-users/zsh-syntax-highlighting
+zsh-users/zsh-completions
+zsh-users/zsh-history-substring-search
+urbainvaes/fzf-marks
+zdharma-continuum/fast-syntax-highlighting kind:defer
+
+# Initialize completions
+belak/zsh-utils path:completion

zsh/.zshrc

@@ -1,48 +1,93 @@
-# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
-# Initialization code that may require console input (password prompts, [y/n]
-# confirmations, etc.) must go above this block; everything else may go below.
-#if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
-  #source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
-#fi
-export PATH="$HOME/.local/bin:$PATH"
+export PATH="/snap/bin:$HOME/.local/bin:$HOME/dotfiles/scripts:$PATH"
+export XDG_CONFIG_HOME="$HOME/.config" # Fix nvim bug
+
+[[ -z $SSH_AUTH_SOCK ]] || export FORWARD_SOCK=$SSH_AUTH_SOCK
 
 [[ -f ~/.zsh/.powerline_config ]] && source ~/.zsh/.powerline_config
 [[ -f ~/.zsh/.user_config ]] && source ~/.zsh/.user_config
 [[ -f ~/.zsh/.virtual_env_config.zsh ]] && source ~/.zsh/.virtual_env_config.zsh
-[[ -f /usr/share/doc/find-the-command/ftc.zsh ]] && source /usr/share/doc/find-the-command/ftc.zsh
 [[ -f ~/.zsh/.local_config ]] && source ~/.zsh/.local_config
+[[ -f ~/.zsh/.os_config.zsh ]] && source ~/.zsh/.os_config.zsh
+
+if [[ -f ~/.zsh/.shared_config ]] && [[ "$SUDO_USER" != "fabian" ]] ; then
+    shared_config=1
+else
+    shared_config=0
+fi
+
+if [[ -f ~/.zsh/.shared_config ]] ; then
+    touch ~/.config/nvim/.shared_config
+fi
+
+update_dotfiles() {
+    cd ~/dotfiles || return
+    if git fetch --dry-run 2>&1 | grep -q .; then
+        git pull > /dev/null 2>&1
+    fi
+}
+
+if [ "$shared_config" -eq 0 ]; then
+    update_dotfiles 2>&1 &!
+fi
+
+
 
 # Load Antidote
 mkdir -p ${ZDOTDIR:-~}/.cache/zsh
 static_file=${ZDOTDIR:-~}/.cache/zsh/.zsh_plugins.zsh
-plugins_txt=${ZDOTDIR:-~}/.zsh/.zsh_plugins.txt
+if [ $shared_config -eq 0 ]; then
+    plugins_txt=${ZDOTDIR:-~}/.zsh/.zsh_plugins.txt
+    # Vi mode
+    bindkey -v
+    VI_MODE_SET_CURSOR=true
+else
+    plugins_txt=${ZDOTDIR:-~}/.zsh/.zsh_plugins_shared.txt
+    static_file=${ZDOTDIR:-~}/.cache/zsh/.zsh_shared_plugins.zsh
+fi
 # clone antidote if necessary
 if ! [[ -e ${ZDOTDIR:-~}/.antidote ]]; then
   git clone https://github.com/mattmc3/antidote.git ${ZDOTDIR:-~}/.antidote
 fi
 
+#zstyle ':omz:plugins:docker' legacy-completion yes
+zstyle ':completion:*:ssh:*' hosts off
+zstyle ':completion:*:scp:*' hosts off
+
+# Run rehash for external commands
+zstyle ":completion:*:commands" rehash 1
 # source antidote and load plugins from `${ZDOTDIR:-~}/.zsh_plugins.txt`
 source ${ZDOTDIR:-~}/.antidote/antidote.zsh
 antidote load ${plugins_txt} ${static_file}
+export SSH_REAL_SOCK=$SSH_AUTH_SOCK
+[[ -z $FORWARD_SOCK ]] || export SSH_AUTH_SOCK=$FORWARD_SOCK
 
 setopt interactivecomments
-setopt HIST_IGNORE_SPACE
+
+# History options
+HISTSIZE=100000                  # Set the amount of lines you want saved
+SAVEHIST=100000                  # This is required to actually save them, needs to match with HISTSIZE
+setopt EXTENDED_HISTORY          # Write the history file in the ":start:elapsed;command" format.
+setopt INC_APPEND_HISTORY        # Write to the history file immediately, not when the shell exits.
+setopt SHARE_HISTORY             # Share history between all sessions.
+setopt HIST_EXPIRE_DUPS_FIRST    # Expire duplicate entries first when trimming history.
+setopt HIST_IGNORE_DUPS          # Don\'t record an entry that was just recorded again.
+setopt HIST_IGNORE_ALL_DUPS      # Delete old recorded entry if new entry is a duplicate.
+setopt HIST_FIND_NO_DUPS         # Do not display a line previously found.
+setopt HIST_IGNORE_SPACE         # Don\'t record an entry starting with a space.
+setopt HIST_SAVE_NO_DUPS         # Don\'t write duplicate entries in the history file.
+setopt HIST_REDUCE_BLANKS        # Remove superfluous blanks before recording entry.
 # Clear screen by ctrl+q
 bindkey '^q' clear-screen
 
 alias vim=nvim
 alias sudo='sudo '
+alias cgrep="grep --color=always"
 export EDITOR='nvim'
 
-#PATH="/home/fabian/perl5/bin${PATH:+:${PATH}}"; export PATH;
-#PERL5LIB="/home/fabian/perl5/lib/perl5${PERL5LIB:+:${PERL5LIB}}"; export PERL5LIB;
-#PERL_LOCAL_LIB_ROOT="/home/fabian/perl5${PERL_LOCAL_LIB_ROOT:+:${PERL_LOCAL_LIB_ROOT}}"; export PERL_LOCAL_LIB_ROOT;
-#PERL_MB_OPT="--install_base \"/home/fabian/perl5\""; export PERL_MB_OPT;
-#PERL_MM_OPT="INSTALL_BASE=/home/fabian/perl5"; export PERL_MM_OPT;
+# Allow access to all libvirt vms
+export LIBVIRT_DEFAULT_URI="qemu:///system"
+
 alias ls="ls --color=always"
-#export PATH="$PATH:${HOME}/Labor/tls-in-muas/starttls-research/99-Tools:/home/fabian/go/bin"
-# For ccache
-#export CCACHE_CPP2=YES
 
 delzip() {
    unzip -Z -1 "$@" |  xargs -I{} rm -rf {}
@@ -52,13 +97,38 @@ export MITMPROXY_SSLKEYLOGFILE="~/.mitmproxy/sslkeylogfile.txt"
 
 [[ -f ~/.zsh/.mac_config ]] && source ~/.zsh/.mac_config
 
+# Workaround for async issues https://github.com/romkatv/powerlevel10k/issues/1554
+unset ZSH_AUTOSUGGEST_USE_ASYNC
+
 # Powerlevel 10k
 # Remove padding on right side
 ZLE_RPROMPT_INDENT=0
 
 # To customize prompt, run `p10k configure` or edit ~/dotfiles/zsh/.p10k.zsh.
-if test -f ~/dotfiles/zsh/.p10k.mac.zsh; then 
-    source ~/dotfiles/zsh/.p10k.mac.zsh
-else
+function load_p10k() {
+    if zmodload zsh/terminfo && (( terminfo[colors] >= 256 )) && [ $shared_config -eq 0 ]; then
       [[ ! -f ~/dotfiles/zsh/.p10k.zsh ]] || source ~/dotfiles/zsh/.p10k.zsh
-fi
+    else
+      [[ ! -f ~/dotfiles/zsh/.p10k_shared.zsh ]] || source ~/dotfiles/zsh/.p10k_shared.zsh
+    fi
+}
+load_p10k
+#
+# This speeds up pasting w/ autosuggest
+# https://github.com/zsh-users/zsh-autosuggestions/issues/238
+pasteinit() {
+  OLD_SELF_INSERT=${${(s.:.)widgets[self-insert]}[2,3]}
+  zle -N self-insert url-quote-magic # I wonder if you'd need `.url-quote-magic`?
+}
+
+pastefinish() {
+  zle -N self-insert $OLD_SELF_INSERT
+}
+zstyle :bracketed-paste-magic paste-init pasteinit
+zstyle :bracketed-paste-magic paste-finish pastefinish
+# https://github.com/zsh-users/zsh-autosuggestions/issues/351
+ZSH_AUTOSUGGEST_CLEAR_WIDGETS+=(bracketed-paste)
+
+export LANG="en_US.UTF-8"
+export LC_CTYPE="en_US.UTF-8"
+export TIME_STYLE="long-iso"